Visitors to Date:

blog counter

Building a House in Kala Point, Port Townsend, WA

Building a House in Kala Point, Port Townsend, WA
A running narrative of first-time builders of their retirement home in Port Townsend, WA (NE corner of the Olympic Pennisula, 60 miles NW of Seattle). Follow us as this adventure unfolds in late 2008 and beyond. 18 months under construction, we moved in on May 25th, 2010. Photo taken August 15, 2010.

Search This Blog

Monday, April 25, 2011

Making Hay While . . . (Month 29)

As you can tell, the enthusiasm to blog has wained, so perhaps a monthly update is more appropriate as we near the end of the is process of building and blogging.

April is supposed to be Spring like up here, which means rainy in Seattle but a bit drier in Port Townsend. Well, little Ms. Nina screwed thing up this year. We've had 8 inches of rain in the first 3 months of the year and the first two weeks of April was just same. Then, just before Earth Day, the sun peaked out and we saw it for five (YES 5) days in a row. It was so inspiring that I got a golf lesson and a round in last week. However, all that rain with the addition of sunlight meant an explosion of weeds, especially in the area that we intend to plant our sacrificial lawn. Its over the leach field for the septic, and the easiest way to promote evaporation of the nasty gray water. So one of my non golf days was dedicated to 8 hours of weed pulling in prep for laying sod in a week of two. After all the obvious weeds were sent to hell, I covered most of the area with two large tarps to keep growth down for now. To anyone walking by, I tell them we've laid out our heliport to test landings. You should see their eyes roll, then give it a second thought when I say there's nothing in the CC&Rs (covenants) that disallows it.

While its been raining I've prepped the fireplace wall for the stone veneer that will go up someday this Spring. The first layer is tar paper (black), then extruded wire mesh gets stapled up to provide a base for the scratch coat of mortar. This goes on about 14" thick, gets roughed up (horizontal lines) to provide a grip to the mortar that will hold the rock up. So far, I've got the tar paper, mesh and scratch coat up, and the mantle laid out on the wall. The next process will be to lay the coral limestone blocks (Eldorado Stone) out from Top to Bottom, working around the mantle outline, and ending hopefully flush at the floor. You work top down in order to keep the stone clean of dripping mortar. The bedding layer of mortar, if mixed to a loose peanut butter consistency, provides enough suction to keep the blocks in place. I didn't believe it but that's the way it was done on the stone belt line for the house, so seeing is believing.

The shed is progressing nicely, but its a time sink. I order up a slug of 1/4 T&G cedar for the interior and nailed it up a in couple days with my stapling gun (Porter Cable). Managed to keep it mostly level, so all the edges matched up fairly well. I stained it light gray to protect the wood, and then put up the trim and painted it with oil based to match the exterior. Also did the rock prep (like the fireplace) on the outside since I had a box of corners and flats left from the house and only needed one more box of flats to do the belt line. The neighbors are jealously accusing me of building a large doll house rather than a garden/tool shed. The CC&Rs say to make it resemble the house—I did.

We're working our way back on the lot in terms of landscaping. Tim Hamm and I built a rock walkway to the shed and arbor and planted a couple Japanese maples on a bermed area in front of the shed. When they get bigger in 5-10 years, they'll mostly hide the shed from street view and provide a nice backdrop to the patio in front of it.

We still have to drop some big rocks on the berm and plant the rhodys and azaleas that we got last weekend, when it wasn't raining.

The rocks are a challenge since they weight 100-300 pounds. Tim is going through chemo, so he doesn't have a lot of muscle power right now. I think the strategy will be to roll them off the trailer into a wheel barrow, then toss them on the berm and muscle them around with a crow bar. It worked before, so that seems like a good plan. If I had a couple young footballers in the neighborhood, it could be done for the cost of beer.'

The arbor (Costco, a deal) provides a break from the side and back yards, and will have some big bushes on either side to provide a visual barrier to the back yard, which is mainly weeds and a project for next year. Nancy planted a couple Clematis along the sides, so it should have some nice climbing vines on it come next fall.

Well, the sun has retreated for another week, so it time to think about inside work. Hope I don't end up calling this brief burst of sunlight last week the 5-days of Spring, but it could be. Nevertheless, the rhodys are coming out and will be in full bloom for the festival in late May. Cheers.

Subcontractors and Suppliers

  • Balco Excav. (land clearing, Bill Snyder)
  • Bill McCutchen's Mill (cedar trim)
  • Blake Tile and Stone, Sequim (Judy Reno, Eldorado Stone, Tile)
  • Bob Brown Plumbing (Bob & Josh Brown)
  • Boise Cascade joists (from Carls)
  • Carl's Building Supply (Mike, Melissa, Michele, Terry & Lawrence)
  • Castlerock Landscaping (Tim Hamm, Sequim)
  • Cotton RediMix (concrete and gravel)
  • Craighead Electric (Gary Estes)
  • Custom Hearth (propane fireplaces), Pousbo
  • Daltile (Seattle, Wedi board)
  • Discount Cabinets of Washington (Sequim)
  • Discovery Bay Materials (gravel, top soil)
  • Earl Kong (professional forester, PT))
  • EcoHaus (Amer. Clay Plaster, cork flooring)
  • Ellis Construction (Gary and Troy Ellis, framing)
  • Evergreen Products (Drywall, Sequim)
  • Fergusons, Seattle (Plumbing fixtures, Bud Allen Wright)
  • FInlandia Saunas (Tigard, OR)
  • Fitzgerald Concrete (driveway, Mike Fitzgerald)
  • Four Corners Nursery (trees, Port Hadlock)
  • Frank Feltes Custom Drywall and Painting (drywall and painting)
  • Frank Ward and Wayne Jobst (Stone masons)
  • Fredricks Appliances (Redmond, all appliances)
  • Giraffe Gutters (Dan Shaw, Chimicum)
  • Glass Etchings by Perrett (Jerry Perrett)
  • Hadlock Building Supply (bits and pieces)
  • Hardiboard, siding, backer board (from Carls and Home Depot)
  • Henerys Hardware (Cabot stain, misc. fasteners)
  • Hi-Tech Electronics (Audio & Media, Port Angeles)
  • Hide-A-Hose (Joseph, A-B Vacuum, Puyallup, WA)
  • Home Depot (electrical & plumbing supplies, interior paint)
  • Home Storage Solutions (John Plake, PT)
  • Hope Roofing (Pabco Paramont Advantage shingles)
  • Jim's Tool Time (J. Quandt, misc. carpentry)
  • K&D Concrete (Don McNeese)
  • Kitchen and Bath Studio (Shelly Little, cabinets)
  • Levi's Energy Services LLC (radiant design, vents, propane piping)
  • Meta Marble and Granite (travertine), Seattle
  • Michaelangelo (sepentinite), Seattle
  • Mikael Brostrom (Structural Engineer)
  • Mills Interiors (wood flooring, some tile)
  • North Coast Electrical (Electrical Supplies)
  • Olympic Garage Doors (Sequim)
  • Penisula Flooring (carpet)
  • Penisula Shower and Mirror (Sequim)
  • PexSupply (online plumbing and radiant supplies)
  • Puget Sound Power (and Atelco installers)
  • Richard Berg Architects (Richard and Darlene)
  • Richard Gifford Construction (septic, dry wells and grading)
  • Richerts Marble and Granite (countertop fabricators)
  • Seattle Lighting (lighting fixtures)
  • Secret Gardens Nursery (Sheila Piccini)
  • Shine Quarry (basalt for landscaping)
  • Sierra Pacific Windows (Rob Sorg)
  • Simpson Doors (from Carls)
  • Simpson Strong Tie (fasteners & hold downs)
  • Stewart Excavating (Mark Stewart, foundation)
  • Sunshine Propane (propane and tank)
  • Therma-Tru Doors (from Carls)
  • Tracy's Insulation (batts and blow in)
  • Trex Decking (from Carls)
  • Trussworks (roof trusses, Carl's)
  • Velux (Skylights and Solar tubes, Carls)
  • Versalam beams (from Carls)
  • Warmboard (Bruce Hull)
  • Wisbo Aquipex, Taco Pumps, Polaris tank (Sunshine Propane)

Followers

About Me

My photo
Professional geologist (USGS, 1972-2008), amateur home remodeler and now builder. Interested in sailing, all things involving salt water, woodworking, and food in general. Owner of Paleo Seis Surveys LLC, consulting in Quaternary geology and geological hazards.